Changing Engine Oil, Oil Filter, And Fuel Filter (Subaru/Robin-Powered Units) - Hobart Welders Champion 10,000 Owner's Manual

8-6. Changing Engine Oil, Oil Filter, and Fuel Filter (Subaru/Robin-Powered Units)

Full
Tools Needed:
OM-945 Page 30
3
1
!
Stop engine and let cool.
1 Oil Drain Valve
2 1/2 ID x 7 in Hose
3 Oil Filter
Change engine oil and filter ac-
cording to engine owner's manual.
!
Close valve and valve cap
before adding
running engine.
Fill crankcase with new oil to full
mark on dipstick (see Section 8-2).
4 Fuel Filter
5 Fuel Line
Replace line if cracked or worn.
Install new filter. Wipe up any
spilled fuel.
Start engine, and check for fuel
leaks.
!
Stop engine,
connections as necessary,
4
and wipe up fuel.
5
2
oil and
tighten
802 353-G / S-0842