5-8. Installing Exhaust Pipe
Tools Needed:
1/2 in
5-9. Weld Output Terminals
OM-945 Page 20
!
Engine backfire can cause se-
vere burns or other injuries.
Do not point exhaust pipe to-
ward control panel.
away from exhaust outlet.
.
Point exhaust pipe in desired di-
rection but always away from
front panel and direction of travel.
1
2
For Direct Current Electrode Posi-
tive (DCEP), connect work cable to
Negative (−) terminal and electrode
holder cable
terminal.
For Direct Current Electrode Nega-
tive
connections.
1
2
Keep
801 681 / Ref. 226 427-A
Negative (−) Weld Output
Terminal
Positive (+) Weld Output
Terminal
to
Positive
(+)
(DCEN),
reverse
cable
Tools Needed:
3/4 in
802 353-G / Ref. 226 427-A