Bang & Olufsen BeoVision 7 Manual page 8

8
>> Watch TV
Turn the television
You can turn the television using your Beo4
remote control.*
Press repeatedly to display
STAND on Beo4
Press to turn the television to the
left or the right, or ...
... press the number buttons to
choose a pre-defined position;
1 represents the far left position,
9 represents the far right
position
If your television is equipped
with a stand with motorised tilt
function, press to tilt the tele-
vision up or down
*Note: You cannot use the
motorised stand before you have
completed the calibration of the
built-in stand. Please refer to the
chapter 'First time setup of your
television' on page 26 in the
Reference book.
LIST
STAND
1 – 9
For further information about how to preset
positions for TV viewing, refer to the chapter 'Set
positions for the television to turn to' on page 46
in the Reference book.