Sony DSC-H50 Service Manual page 145

1-7-3. Adjusting Method
1. LCD Adjustment
[Automatic Adjustment Program execution items and
sequence]
1. Data Setting during LCD Adj.
2. V-COM Adj.
3. White Balance Adj.
[Adjusting method]
1) Click the [Start] button of the LCD Adjustment.
2) The Automatic Adjustment Program executes "1. Data Setting
during LCD Adj.".
3) Upon successful completion of the "1. Data Setting during LCD
Adj.", the following screen is displayed during the execution
of "2. V-COM Adj.". Using the [Up]/[Down] button on the
screen, adjust so that the brightness of portions A and B on the
LCD panel is equal. After the adjustment, click the [End] but-
ton in the screen.
4) If the [End] button is clicked, the following screen is displayed
during the execution of "3. White Balance Adj.". Check that
the LCD screen is not colored. If colored, using the [Up]/[Down]
button on the screen, adjust so that the LCD screen is not col-
ored. After the adjustment, click the [End] button in the screen.
DSC-H50_ADJ
5) Upon successful completion of all item the LCD Adjustment,
the following message is displayed. Click the [OK] button.
6-28