Connecting The Device - TP-Link AC750 User Manual

Use Web browser, such as Microsoft Internet Explorer 5.0 or above, Netscape Navigator 6.0
or above.
Operating temperature of the Range Extender should be 0℃~40℃ (32℉~104℉).
Operating humidity of the Range Extender should be 10%~90%RH (Non-condensing).

2.3 Connecting the Device

To establish a typical connection of the Range Extender, please take the following steps:
1. Connect the Cable/DSL modem to a Wireless router with an Ethernet cable.
2. Plug your RE200 directly to a standard electrical wall socket, which is near the Wireless router.
3. Connect your Wireless Clients (such as notebook, pad, smart phone, etc.) to RE200 wirelessly.
Or you can connect your PC to the sole LAN port of Range Extender via an Ethernet cable.
4. Log in the web-based management page of RE200 and complete the configurations.
(Please refer to Chapter 3 Quick Installation Guide
configurations, as you need.) Through the web page configuration you can successfully
connect RE200 to the wireless router.
5. Adjust an ideal location for RE200. (Please refer to Section
information about ideal location.)
RE200
Figure 2-1 Typical connection of RE200
5
AC750 WiFi Range Extender User Guide
or Chapter 4 Configure the Device
2.1 Before You Begin
for the
for detailed