Chapter 2 Hardware Installation; Before You Begin; Basic Requirements; Hardware Installation Basic Requirements - TP-Link AC750 User Manual

Ac750 wifi range extender
Hide thumbs Also See for AC750:
Table of Contents

Advertisement

Chapter 2 Hardware Installation

2.1 Before You Begin

Please read this User Guide carefully before installing and using the equipment. The operating
distance range of your wireless connection can vary significantly depending on the physical
position of the wireless devices. Factors that can weaken signals by getting in the way of your
network's radio waves are metal appliances or obstructions, and walls. Typical ranges vary based
on the types of materials and background RF (radio frequency) noise in your home or office.
In order to optimize the performance of RE200, please follow the instructions below to achieve an
ideal location (please make sure it is always within the wireless coverage of the wireless router).
1)
Half-way Between - Generally, the ideal location for RE200 is half-way between the
Wireless router and Wireless Client. If the wireless signal is not satisfactory, you may place
RE200 somewhat nearer to the Wireless router.
2)
No Obstacles and Spacious - Clear obstacles in the way between RE200 and Wireless
router. It's better to locate it in a spacious place, such as near the corridors.
3)
No Interference - Keep RE200 far away from wireless interference, which may come from
electrical appliances that works in the same frequency band as RE200, such as Blue tooth
devices, cordless phones, microwave ovens, etc.
Note:
TP-LINK recommends that you connect to the Range Extender when your home network
connection is poor, or when you want a larger wireless coverage to eliminate "dead zones". As in
compliance with the wireless transmission protocol, all the Range Extender devices are set to
work in half-duplex instead of full-duplex mode. In other words, the Range Extender has to
process one-way communication between your root Wireless Router or AP and the terminal
clients; so the transmission time will be double-increased, while the speed will be decreased.

2.2 Basic Requirements

Place your Range Extender in a well-ventilated place far from direct sunlight, any heater or
heating vent.
Leave at least 2 inches (5cm) space around the device for heat dissipation.
Turn off your Range Extender and unplug the power adapter in a lighting storm to avoid
damage.
RE200
AC750 WiFi Range Extender User Guide
4

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Re200Re200 ac750

Table of Contents