Advertisement
To lower feed below the needle plate, turn
drop feed control v clockwise. Fabric will
4 Set fin neutral (vertical position).
Set e so its pointer is on the indicator scale number corresponding to the
desired stitch length. Turn lever f to the right as far as it will go.
To sew backwards, turn lever f toward the left as far as it will go.
Control e stops stitch length, 1 to 5, on indicator scale.
$uut6
4 h?nth 7
9 utafltn
R7O66
7
z c2inf7
tli? ,
4
1 ac4ine
Stitch length may also be regulated by turning e
all
the way left
arid
fin the forward sewing position as far as it will go. Sew a few stitches
and regulate the stitch length by turning f slowly toward the left
until desired stitch length is obtained. To hold the stitch length
in
position,
turn e right
)—
until it stops.
The machine feed is dropped for darning, hoop
embroidery and button sewing.
When control v is turned to the right as far
as
it
Wii
go, ieedng of the fabric resumes
automatically when you start sewing.
24
R 6029
Advertisement
