Advertisement
R 7071
ifyza9 4
e wtn9
Set:
DiolB—O
Lever E—O
Turn control D left to desired stitch width (indicoted by
numbers I to 4; the higher the number, the wider the
stitch).
Do not move C or D while needle is in fabric.
2
Al
Lever C changes needle position from left to right. Thus the stitching can be moved from
the center to the left or right of the needle plate slot.
To change needle position,
press
ever C down and mov, into:
Notch I
—
The needle is at the extreme left of the needle plate slot in straight sewing and swings to the right in
zigzag stitching.
Notch 2— The needle is centered is the needle plate slot in straight sewing, and swings both ways in zigzag
stitching.
Notch 3—The needle is at the extreme right of the needle plate slot in straight sewing, and swings to the left in
zigzag stitching.
Pointer z indicates the position of the needle on the top scale.
A
Lever f lengthens zigzag
stitches or pocks them more
closely together. To form the
satin stitch graduolly de
crease stitch length almost
to 0 until you get the de
sired effect.
9
Advertisement
