Honda Wave 110i User Manual page 67

Engine Oil u Changing Engine Oil
3. Turn the ignition switch off, stop the
engine and wait for 2 to 3 minutes.
4. Place a drain pan under the drain bolt.
5. Remove the oil fill cap/dipstick, drain
bolt, and sealing washer to drain the oil.
u Discard the oil at an approved
recycling centre.
64
Drain bolt
Sealing washer
http://www.motorcycle.in.th
6. Install a new sealing washer onto the
drain bolt.
7. Install the drain bolt and tighten.
Torque: 24 N·m (2.4 kgf·m, 18 lbf·ft)
8. Fill the crankcase with the recommended
oil ( ) and install the oil fill cap/
P. 44
2
dipstick.
Required oil
When changing oil:
0.8 litres (0.8 US qt, 0.7 Imp qt)
9. Check the oil level.
10. Check that there are no oil leaks.
P. 62
2