Atlas Atlasmaster DCC System HandCommand Instruction Manual
  1. Manuals
  2. Brands
  3. Atlas Manuals
  4. Remote Control
  5. Atlasmaster DCC System HandCommand
  6. Instruction manual

Atlas Atlasmaster DCC System HandCommand Instruction Manual

Handcommand for train models
Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
Enlarged version
Removing a locomotive from a consist
1. Select the address of the locomotive to be removed from a Consist.
INSTRUCTION MANUAL
2. Enter the Menu by pressing the Forward,
, and Reverse,
, buttons.
nu-
3. Use the + or – buttons to select "
", and press Enter. The display will blink.
4. Press Enter again to remove the locomotive from the Consist.+
LIMITED ONE-YEAR WARRANTY
Atlas Model Railroad Company, Inc. warrants that this HandCommand will be free from defects
in material and workmanship for a period of one year from the date of purchase. If this
HandCommand fails during the warranty period, carefully pack the item in the original carton,
together with the dated sales receipt, and return to: Atlas DCC Warranty, 378 Florence Avenue,
Hillside, NJ 07205. Defects due to misue, improper maintenance and/or abuse are not covered
by the warranty. Items that have been disassembled by the modeler or anyone other than an
authorized Atlas repair person are not covered by the warranty. This warranty gives you specif-
ic legal rights and you may also have other rights which vary from state to state.
FOR TECHNICAL ASSISTANCE:
(908) 687-0880
www.atlasrr.com
dcc@atlasrr.com
ITEM #331
Atlas Model Railroad Co, Inc. • 378 Florence Ave. • Hillside • NJ • 07205

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the Atlasmaster DCC System HandCommand and is the answer not in the manual?

Questions and answers

Related Manuals for Atlas Atlasmaster DCC System HandCommand

Summary of Contents for Atlas Atlasmaster DCC System HandCommand

  • Page 1 HandCommand fails during the warranty period, carefully pack the item in the original carton, together with the dated sales receipt, and return to: Atlas DCC Warranty, 378 Florence Avenue, Hillside, NJ 07205. Defects due to misue, improper maintenance and/or abuse are not covered by the warranty.

  • Page 2: Table Of Contents

    6' coiled cord to connect your HandCommand to the UPC. Controlling Speed...6 The enclosed Atlas HandCommand is a walk-around throttle designed to give you the functionality of the Atlas Commander, without the ability to program decoders. You Changing Directions...6...

  • Page 3: Getting Started

    Command Station) - Used to select the direction of the selected engine. Press both but- The Atlas HandCommand is designed to work with the Atlas Commander or any tons together to access the Menu system. system that supports XpressNET technology. You must have an Atlas Commander Stop - Press this button to turn the track voltage on or off.

  • Page 4: Running Your Locomotive

    RUNNING YOUR LOCOMOTIVE Activating Functions* When you connect the HandCommand to an Atlas Commander or other XpressNET Buttons F0, F1 and F2 are used to activate functions on the selected locomotive compatible command station, the display will default to the Locomotive display, and to control turnouts or other accessories via an accessory decoder.

  • Page 5: Emergency Stop

    The user may configure function one - F1, function two - F2, function three - F3, Emergency Stop and function four - F4. Examples of additional functions are sound (bells, horn, In case of a foreseeable train crash, operation can be stopped by pressing the whistle) ditch lighting, or strobe lights.

  • Page 6: The Menu System

    Menu Selections Acquiring a locomotive that is currently running: This menu is used to control turnouts, or control other accessories. When selecting a locomotive, either directly using the + or - buttons or from the NOTE: You must have an accessory decoder attached to one or stack, you may adjust the speed dial to approximate the locomotive’s speed.

  • Page 7: Setting Speed Steps

    Commander is set for 14 speed steps. The Commander defaults to 28 Atlas Commander supports 14,28, and 128 Speed Steps and defaults to 28 speed speed steps. If your locomotive returns to 14 speed steps after losing power, or steps.

  • Page 8: Consisting

    Consists are also known as Multiple Unit the Locomotive Display. lashups, or MUing. *(Please Note: Version 2.31 software for the Atlas This menu is used to display or change the HandCommand Commander does not support consisting. Please visit the DCC section of our web- XpressNET address.

This manual is also suitable for:

331

Table of Contents