Refrigerating Cycle Diagram - Samsung JH052EAV Series Service Manual

9-2 Refrigerating Cycle Diagram

9/12K
Indoor Unit
Condenser
�as refrigerant discharged from the compressor is cooled down in the condenser of the outdoor unit by means of thermal emission
and turned into a liquid refrigerant before being sent to the evaporator.
Compressor
It compresses the low-temperature, low-pressure refrigerant to let it flow to the Cycle.
Evaporator
As the liquid refrigerant that has been absorbed via capillary tubes evaporates (from liquid to gas), it absorbs heat from the surround-
ings, thereby cooling the indoor area.
Service Valve
Using a hex wrench, turn the needle valve countercloc�wise to open the valve. It is used for vacuuming, gas drain, refrigerant
injection, refrigerant purge, and indoor-outdoor units connection.
Accumulator
It prevents liquid refrigerant from flowing into the compressor.
(If liquid refrigerant enters the compressor, it becomes overloaded)
9-2
Eiffiel_29331A_10.22.08.indd 2
Outdoor Unit
Ø8 1 2� 851
R�W STA�ES L
�-F 1.3
IN
Valve-�way
DB9�-0715�B
Compressor
3/8"
��C090LUBER
EEV D1�S�-3R
1/�"
Cond S/S
Air
Samsung Electronics
2008-10-22 17:06:14