Setting Up The Presets; Auto Patrol; Preset Speed - Verint Nextive S5503 User Manual

Setting Up the Presets

► To set the Title:
1. Press "95" + hold the [PRESET] key for 2 seconds to enter the main menu
2. Move the cursor to <CAMERA TITLE>, and then press the [OPEN] key
3. Move the cursor down to CAMERA TITLE INPUT, and then press the key. Use
4. Move the cursor down to CAMERA TITLE, and then press the key to select
5. Press the [OPEN] key to confirm the selection or press the [CLOSE] key to
Setting Up the Presets
<PRESET SETUP>

Auto Patrol

<PRESET SETUP> → AUTO PATROL
The auto patrol function will continuously scan up to 256 preset positions and is
not limited by the scan range.
► To activate the Auto Patrol:
1. Press "95" + hold the [PRESET] key for 2 seconds to enter the main menu
2. Move the cursor to <PRESET SETUP>, and then press the [OPEN] key
3. Move the cursor to the AUTO PATROL selection and then press the [OPEN]
4. Move the joystick up/down to choose the position, and left/right to set ON or
5. Press the [OPEN] key to confirm the selection or press the [CLOSE] key to

Preset Speed

<PRESET SETUP> → PRESET SPEED
88 © 2013 Verint Video Systems Inc.
screen.
<CAMERA TITLE> menu.
the joystick up/down to select the character.
either ON or OFF. If OFF is selected, then the camera title will not be shown.
cancel selection and exit from the menu screen.
screen.
<PRESET SETUP> menu.
key.
OFF.
cancel selection and exit from the menu screen.