Memory Features - Chevrolet Equinox2011 Owner's Manual

To return the seatback to the upright
position:
1. Lift the lever fully without
applying pressure to the
seatback, and the seatback will
return to the upright position.
2. Push and pull on the seatback to
make sure it is locked.
Power Reclining Seatbacks
To adjust a power seatback,
if available:
Tilt the top of the control
rearward to recline.
Tilt the top of the control forward
to raise.

Memory Features

On vehicles with the memory
feature, the 1 and 2 buttons on
the outboard side of the driver seat
are used to manually save and
recall the driver seat and outside
mirror positions. These manually
stored positions are referred to as
Button Memory positions.
The vehicle will also automatically
save driver seat and outside mirror
positions to the current driver
Remote Keyless Entry (RKE)
transmitter when the ignition is
I n f o r ma t i o n P r o v i d e d b y :
In Brief
turned off. These automatically
stored positions are referred to as
RKE Memory positions.
Storing Button Memory Positions
To save positions into Button
Memory:
1. Adjust the driver seat, seatback
recliner, and both outside mirrors
to the desired driving positions.
2. Press and release the
MEM (Memory) button.
3. Press 1 until a beep sounds.
4. Repeat Steps 1 through 3 for a
second driver using 2.
To recall the manually saved Button
Memory positions, press and hold
1 or 2. The driver seat and
outside mirrors move to the
positions stored to those buttons
when pressed. Releasing 1 or 2
before the stored positions are
reached stops the recall.
To automatically recall RKE Memory
positions, unlock the driver door
with the RKE transmitter and open
1-9