Taking command from a locked unit in a Master system
1.
Press the CMD key on a locked station
-
A dialog will be shown on the unit requesting command
-
A command request dialog will be shown on the master unit
2.
Accept the command request on the master unit
-
The requesting remote will now be opened for command transfer. All other units will
remain locked
3.
Take command on requesting remote by pressing the CMD key
-
Command will be transferred to this remote, accompanied by a 2 second sound
Delegation of control in multiple station systems |
Passive unit requesting
Active unit accepting
command
command request
AP70/AP80 Operator Manual
| 17