5.
Adjust the width to the size of the recording paper by sliding the front
side of the guide (1).
• • • • Make sure that the recording paper is under the paper limit mark
(2), and the paper should not be over the snubbers (3).
Close the paper input tray.
6.
Note:
• • • • If the paper is not loaded correctly, re-adjust the paper
guides, or the paper may jam.
• • • • If the paper input tray dose not close, the plate in the paper
input tray may be lifted. Push the paper and check that the
paper is flat in the paper input tray.
To pull the paper input tray completely out
Pull the paper input tray (1) until it clicks into place, then pull it
completely out, lifting the front part of the tray.
• • • • To insert the paper input tray
Insert the paper input tray (1) to the unit, lifting the front part of
the tray. Then push it completely into the unit.
Using the optional input tray
You can add the optional input tray (Model No. KX-FA101E/KX-
FA101A).
21
KX-FLB852CX / KX-FLB852CXS