Remove The Stand Brackets; Remove The C4-Board; Remove The C5-Board; Remove The C6-Board - Panasonic TH-50PM50U Service Manual

TH-50PM50U

6.23. Remove the stand brackets.

1. Remove the plasma panel section from the servicing stand
and lay on a flat surface such as a table (covered), with the
plasma panel surface facing downward.
Spread a soft cloth or similar on the table for protection, so
the panel surface is not scratched.
2. Remove the stand bracket (left, right) fastening screws (×4
each) and remove the stand brackets (left, right).

6.24. Remove the C4-Board

1. Remove the flexible cables holder fastening screws (×8
) and disconnct the flexible cables (CB8, CB9, CB10
and CB11).
2. Release the speaker cables from clampers.
3. Disconnect the flexible cables (C41) and disconnect the
couplers (C42, C43 and C44).
4. Remove the screws (×5 ) and remove the C4-Board.

6.25. Remove the C5-Board

1. Remove the flexible cables holder fastening screws (×8
) and disconnect hte flexible cables (CB4, CB5, CB6
and CB7).
2. Release the speaker cables from clampers.
3. Disconnect the flexible cables (C50, C51, C54 and C55)
and disconnect the couplers (C52 and C53).
4. Remove the screws (×5

6.26. Remove the C6-Board

1. Remove the flexible cables holder fastening screws (×6
) and disconnect the flexible cables (CB1, CB2 and
CB3).
2. Release the speaker cables from clampers.
3. Disconnect the flexible cables (C60) and disconnect the
coupler (C61).
4. Remove the screws (×5
14
) and remove the C5-Board.
) and remove the C6-Board.