Front Panel Menus - EEG DE285 HD Product Manual

DE285 HD Caption Decoder/VANC Monitor

3. Front Panel Menus

The front panel LCD screen and Control Pad are used to configure de-
coder settings and networking, and to perform flash updates. The inter-
face is organized in a series of hierarchical menus; use the LEFT and
RIGHT keys to scroll between menu options and the ENTER or DOWN
keys to select options or enter sub-menus. Press the CANCEL key from
any menu screen to return to the top of the menu hierarchy.
The default display on the front panel is the decoder status screen. The
top left shows the format of the Source video input. The bottom left
shows the format of the Program video input. The top right will display
"LAN" if the Ethernet connection is active. If the front panel display
is inactive for 20 seconds or more, the display will revert to the status
screen, unless an update is in progress or the audio level meter is in use.
When this timeout occurs, press any key on the Control Pad to return to
the sub-menu that was in use.
The front panel can also be put into Preset Mode at any time by holding
down the CANCEL key (marked by an 'x') for 5 seconds. The default
display in Preset Mode is the full title of the current layout. To change
the current layout, use the LEFT and RIGHT keys to scroll between
layout choices. When you have reached the desired layout press the
ENTER button to accept the new layout. Once you have entered Preset
Mode, the display will stay in this mode and will not automatically revert
back to the default decoder status screen. To return to Normal mode,
hold down the CANCEL key for 5 seconds.
Note: The preset mode will only display custom layouts saved from the
OSD web configuration. The factory defaults will not be a selectable
option.
Copyright ©2009-2011 EEG Enterprises, Inc. 7
All rights reserved.