Playback; Playing A Tape; Playing A Dvd; Vcr Playback Options - JVC LVT2013-001A Instructions Manual

Playback

Playing a T ape
Playing a T ape
1. Press VCR to control the VCR deck.
2. Insert a pre-recorded video cassette.
• If the unit is powered off, it will power on
automatically when the tape is loaded.
• If the Timer indicator lights on the front panel
display window, press STANDBY/ON once.
3. Press PLAY (N) to start playback.
• If a tape without a safety tab is inserted the
unit starts playback automatically.
4. Press STOP (x) to stop playback.
• If the tape reaches the end before you press
STOP (x) the Recorder automatically stops,
rewinds and ejects the tape.
Notes:
S-VHS Quasi Playback (SQPB)
• This Recorder can play back S-VHS recorded
tapes, however, it cannot make recordings using
S-VHS format tapes.
• SQPB is an abbreviation for S-VHS Quasi Playback.

VCR Playback Options

Buttons Operations
EJECT (Z) Ejects the tape in the VCR deck.
PAUSE (X) Pause playback.
Press repeatedly to step forward one frame at a time.
•
FORWARD (M) Scan forward. In Stop mode, fast forwards the tape.
In Pause mode, starts slow motion playback.
•
•
BACKWARD (m) Scan backward. In Stop mode, rewinds the tape.
•
CLEAR Resets the current tape counter position to 0:00:00. To automatically goto tape counter
position 0:00:00, press RETURN while the tape is in Stop mode or in Play mode.
TRACKING (+/-) Manually reduces noise on the screen during tape playback. Tracking is set
automatically when a tape is inserted.
AUDIO Sets tape audio to HIFI, LEFT, RIGHT or NORMAL.
Use b/B buttons to select tape audio you want.
20
After 5 minutes in STILL mode the Recorder stops to protect
the tape and video heads.
After 3 minutes in SEARCH mode the Recorder returns to PLAY mode to protect the tape and
video heads
After 3 minutes in SLOW MOTION mode the Recorder goes back to PLAY mode to protect the
tape and video heads.
After 3 minutes in SEARCH mode the Recorder returns to PLAY mode to protect the tape and
video heads.

Playing a DVD

Playing a DVD
1. Press DVD to control the DVD deck.
2. Press EJECT, OPEN/CLOSE (Z) to open the disc
tray. Load your chosen disc in the tray, with the
playback side down.
3. Press EJECT, OPEN/CLOSE (Z) to close the
tray. Playback starts automatically. If playback
does not start, press PLAY (N) or Starts play-
back using HOME menu.
4. To stop the playback, press STOP (x).
The unit records the stopped point, depending on
the disc. "Xx" appears on the screen briefly.
Press PLAY (N) to resume playback (from the
scene point). If you press STOP (x) again or
unload the disc ("x" appears on the screen.), the
unit will clear the stopped point.
5. Press EJECT, OPEN/CLOSE (Z) to remove the
disc.
Press EJECT, OPEN/CLOSE (Z) to close disc
tray or press STANDBY/ON (1/&), the disc tray
closes automatically and unit turns off.
Note:
When do not use DVD, please take out DISC.