Table of Contents
Advertisement
Displaying Wi-Fi usage status
From the Settings screen (P.202),
1
tap [Data usage].
Tap
and mark "Show Wi-Fi
2
usage".
"Wi-Fi" tab is displayed and tap it to
check Wi-Fi usage condition.
Airplane mode
In this mode, the functions of using radio
wave transmissions such as calling, accessing
to the Internet (including sending/receiving
mails), etc. are disabled. It is useful when you
want to operate the terminal with no
interruption of incoming calls or mails.
Turning on Airplane mode
From the Settings screen (P.202),
1
tap [More...].
Mark [Airplane mode].
2
When Airplane mode is set,
on the status bar.
When you unmark "Airplane mode", the
Airplane mode turns off.
❖ Information
Alternatively, press and hold
and then tap [Airplane mode] in the pop-up screen,
or drag the status bar downward and tap [Airplane]
to set Airplane mode to on/off.
Even if Airplane mode is on, Wi-Fi, Bluetooth function
and NFC Reader/Writer, P2P function can be turned
on. Be careful not to use Wi-Fi, Bluetooth, NFC
Reader/Writer, P2P functions in a place where the use
is prohibited such as in a airplane or hospital.
Connecting to a VPN (Virtual
Private Network)
Virtual Private Network (VPN) is a technology
to connect to the information in a protected
local network from another network.
Generally, VPNs are provided to companies,
schools and other facilities. A user can access
to the information in the local network from
outside of the premises.
To set up a VPN access from the terminal, you
need to retrieve the information related to
security from your network administrator. For
appears
details, see the following website.
http://www.sonymobile.co.jp/support/ (In
Japanese only)
❖ Information
If you set sp-mode as an ISP, you cannot use PPTP.
P
for over a second
Settings
208
Advertisement
Chapters
Table of Contents
