Data Usage - Sony DoCoMo Xperia feat HATSUNE MIKU SO-04E Instruction Manual

Tap any of [Always]/[Only when
4
plugged in]/[Never (increases data
usage)].
❖ Information
When a Wi-Fi network is disconnected, connection is
automatically switched to a LTE/WCDMA/GSM
network mode.
Using Wi-Fi Direct compatible device
You can connect among the devices
compatible with Wi-Fi Direct via Wi-Fi even
without configuring access point.
You need to turn on the Wi-Fi setting
beforehand (P.203).
From the Settings screen (P.202),
1
tap [Wi-Fi].
Tap and [Wi-Fi Direct].
2
A list of detected Wi-Fi Direct devices
appears.
Select a Wi-Fi Direct compatible
3
device name to connect.
If a note appears, tap [OK].
Tap [Search for devices] to refresh the
detection list.
To change the terminal name displayed
on the detected Wi-Fi Direct
compatible device, tap [Rename
device].
❖ Information
To use the Wi-Fi Direct function, you need an
application compatible with Wi-Fi Direct function.
The function becomes available when you install a
compatible application.
If you start Wi-Fi Direct connection during Wi-Fi
connection, Wi-Fi connection is disconnected and
switched to packet communication (LTE/WCDMA/
GSM).
Bluetooth
Connect Bluetooth device wirelessly using
Bluetooth function. For details on Bluetooth
communication, see "Using Bluetooth
function" (P.245).

Data usage

Enable/Disable mobile data communication
or set data usage limit.
❖ Information
You can check communication volume for each
application. For some applications, the settings can
be displayed.
Settings
206