Technical Data; Intended Use; Product Features; Delivered Items - Bosch Aquatak 150 Original Instructions Manual

F 016 L70 723.book Seite 2 Donnerstag, 29. September 2011 1:16 13
Transport
Switch off the motor and secure the unit before transport-
ing.
Maintenance
Remove the plug from the socket:
– whenever you leave the machine unattended for any pe-
riod
– before checking, cleaning or working on the unit

Technical data

Power washer
Part number
Rated power
Supply Temperature max.
Supply rate min.
Supply pressure max.
Rated (Working) pressure
Max. Operating pressure
Flow rate
Detergent capacity
Weight
Protection class
Serial Number

Intended Use

The product is intended for cleaning areas and ob-
jects outside the house, tools, vehicles and boats.
Drainage pipes can be unclogged and rust or paint
coatings can be removed, if the appropriate acces-
sories such as cleaning agents approved by Bosch
are used.
This product should not be used for professional
use.
Intended Use is related to operation within 0 °C and
40 °C ambient temperature.
Introduction
This manual gives instructions on the correct as-
sembly and safe use of your machine. It is important
that you read these instructions carefully.
When fully assembled the machine weighs approxi-
mately 26 - 29.1 kg. If necessary, obtain assistance
to remove from packaging.

Delivered Items

Carefully remove the machine from its packaging
and check that you have all the following items:
– Power washer
14 • F 016 L70 723 • TMS • 13.09.11
Repairs may only be carried out by authorised Bosch
Service Centres.
Accessories and spare parts
Only use accessories and spare parts which have been
approved by Bosch. Original accessories and spare
parts guarantee that the unit can be operated safely and
without any breakdowns.
Aquatak 150
3 600 H77 A..
[W] 2 700
[°C] 60
[l/h] 17
[MPa] 0.15 – 0.6
[MPa] 14
[MPa] 15
[l/h] 550
[l] 3.0
[kg] 26
/ I
See serial No 15 (rating plate) on machine.
– Power gun/high pressure hose
– Vario-jet-fan power lance
– Roto power lance
– Inlet connector
– Operating instructions
– Storage hooks
(Aquatak 150 – 2x, Aquatak 150 X/160 X – 1x)
– Hose reel handle (Aquatak 150 X/160 X)
– Retaining screw (Aquatak 150 X/160 X)
When parts are missing or damaged, please contact your
dealer.

Product Features

1 Trigger safety lock
2 Trigger
3 High pressure hose
4 Hose drum (Aquatak 150 X/160 X)
5 Handle (Aquatak 150 X/160 X)
6 Detergent tank
7 Power gun
8 Storage hooks
9 Vario-jet-fan power lance
10 Main switch
11 Detergent adjustment knob
English - 2
Aquatak 150 X Aquatak 160 X
3 600 H77 B.. 3 600 H77 C..
2 700 3 000
60 60
17 17
0.15 – 0.6 0.15 – 0.6
14 15
15 16
550 600
2 x 1.5 3.0
27.5 29.1
/ I / I