Dv Dubbing - JVC LPT0923-001B Instructions Manual

EDITING
58
EN

DV Dubbing

You can dub programmes from a camcorder or DV equipment
connected to the unit with a DV cable. The unit's remote control
allows you the limited control of the connected camcorder or DV
equipment functions during dubbing.
NOTES:
● Use the DV cable VC-VDV 204U for connection.
● When you connect a PC to the DV IN connector, we do not assure
the normal operation of this unit.
Your unit
Camcorder
DV equipment
1
Connect a camcorder or DV equipment to the DV IN connector
on the unit's front panel.
2
Press HDD.
3
Press PR +/– to set the channel to "DV".
4
Press ON SCREEN.
● The on-screen display for DV dubbing appears.
5
Press w e to select
the remote icon (facing to the right) for the DV equipment.
6
Press w e to select
, then press ENTER
repeatedly until the desired sound
track appears on the TV screen.
AUDIO 1
: Select this to record the
original stereo sound played
back on the connected DV
equipment.
AUDIO 2
: Select this to record the
dubbed stereo sound played back on the connected DV
equipment.
MIX
: Select this to record the sound of both "AUDIO 1" and
"AUDIO 2".
● Note that this selection is not available when the source programme
is recorded in 16BIT (48 kHz) mode.
7
Press REC MODE repeatedly to set the recording mode.
DV IN connector
DV cable
(VC-VDV 204U)
(not provided)
DV connector
, then press ENTER to display
0:00 1:00 2:00
DV
HDD GR-DV3500
FR360 00:00:00. 00 00:00:00. 00 L – R
12bit SOUND1
DV JVC GR-DV3500
1 2
DV DV
8
Locate the point from where you want to start dubbing, then
stop or pause playback by pressing the following buttons on the
remote control: 4, 5, 3, 8, 9
● To play back in slow speed (1/10 of the normal speed), press 9 to
pause playback, then press 3 or 5.
● To play back frame-by-frame, press 9 to pause playback, then press
9 repeatedly. Each press of 9 advances a frame.
● To change the playback direction, press 3 or 5.
9
Press w e to select
dubbing starts.
● Playback on the external DV equipment and recording on the unit
should start simultaneously.
● To pause dubbing, press w e to select
ENTER. Both the unit and the external DV equipment pause dubbing.
Pressing 9 on the unit also works the same way.
10
Press w e to select
press 8. The DV equipment stops.
11
Press w e to select
12
Press 8 twice on the remote control to stop dubbing.
● Both the unit and the external DV equipment stop dubbing.
NOTES:
● Dubbing copyright guarded programmes is not possible.
● Original DV informations such as the recording date and time are not
recorded.
● The superimposed indication during the operation or dubbing is not
recorded.
● If the dubbing is paused while the channel is set to "DV", you cannot
switch channels.
When you dub from DV equipment other than a
camcorder
A Perform step 1 to 4.
B Locate the point from where you want to start dubbing,
then stop on the DV equipment.
● If you pause the DV equipment in this step, a few second's
still picture will be recorded at the beginning of the recorded
programme.
C Set the input mode to "DV INPUT" on the DV equipment.
● If you select an input mode other than "DV INPUT", unwanted
pictures may be recorded at the beginning of the recorded
programme.
D Perform step 9 to 12.
To skip unwanted part of the source picture
Press ENTER to stop both equipment, then press w e to select
.
Locate the point where you want to restart dubbing by pressing 4,
5, or 3, then press 8.
Press w e to select
dubbing.
, then press ENTER. The
, then press
, then press ENTER. Then
, then press ENTER.
, then press ENTER to restart