Table of Contents
Advertisement
TROUBLESHOOTING
80
EN
SHOWVIEW NO. ERROR
CONFIRM SHOWVIEW NO. THEN RETRY
An invalid S
V
number has been input. (
HOW
IEW
GUIDE PROGRAM IS NOT SET
SET GUIDE PROGRAM THEN RETRY
To set the timer programme using the S
Guide Program number must be set in advance. (
CAN NOT SET SHOWVIEW TIMER PROGRAMMING DURING
TIMER RECORDING OR INSTANT TIMER RECORDING
Appears when you tried to input a S
timer recording or instant timer recording.
REGION CODE ERROR
CHECK DISC
A disc loaded cannot be played back on this unit since the region
number of the disc does not match that of the unit. (
UNREADABLE DISC
CHECK DISC
When an incompatible disc is loaded, 4 has been pressed.
(
pg. 6)
COULD NOT FORMAT THE DISC
CHECK THE DISC
Formatting is not complete since the disc may be dirty or
damaged. Take out the disc, clean it and retry. (
CAN NOT FINALISE THIS DISC
Finalising is not complete since the disc may be dirty or
damaged. Take out the disc, clean it and retry. (
CAN NOT CANCEL FINALISATION
OF THIS DISC
Cancelling disc finalisation is not complete since the disc may be
dirty or damaged. Take out the disc, clean it and retry. (
75)
pg. 44)
V
system, the
HOW
IEW
pg. 70)
V
number during
HOW
IEW
pg. 6)
pg. 9, 74)
pg. 9, 75)
pg. 9,
PRESS [STOP] AGAIN TO STOP RECORDING
During Live Memory playback, 8 has been pressed. (
TIMER RECORDING COMPLETED
Timer recording has finished during Live Memory playback.
PLAYBACK WILL STOP
THEN TIMER RECORDING WILL START
Timer recording finished during Live Memory playback, then the
next timer recording is about to begin while playback continues.
COPY PROHIBITED
CAN NOT RECORD
An attempt has been made to record copy-protected contents.
An attempt has been made to record copy-once contents on a
disc that is not CPRM compatible, such as DVD-R.
COPY PROHIBITED
CAN NOT PLAY
The unit has detected invalid contents at the start or in the
middle of playback.
THE i.LINK DEVICE THAT YOU HAVE CONNECTED IS NOT
RECOGNIZED
MAKE SURE THAT THE DEVICE IS CONNECTED PROPERLY AND
POWERED ON
An attempt has been made to start DV dubbing when a digital
video camera is not properly connected to the unit.
Check the connection. (
pg. 58)
pg. 42)
Advertisement
Table of Contents
