JVC LPT0923-001B Instructions Manual page 71

8
View the Confirmation screen.
"AUTO SET COMPLETED" or "SCAN COMPLETED" is displayed
on the TV screen.
9
Press SET UP to complete the setting.
Using the Confirmation screen, you can skip or add channel
positions, enter station names and perform other operations. Refer to
pages 71 – 72 for the procedures.
Depending on reception conditions, the stations may not be stored in
order, and the station names may not be stored correctly.
For information on scrambled broadcasts, refer to "When Receiving A
Scrambled Broadcast" (
IMPORTANT:
In certain reception conditions, station names may not be stored
correctly, and Auto Guide Program Number Set may not work
properly. When the Guide Program numbers are not set properly,
the programme that you do not intended to record will be timer-
recorded by the S V
HOW IEW
the timer using the S
HOW
desired channel is selected correctly. (
Timer Programming")
Your unit memorises all receivable stations even if reception of
some of them is poor. You can delete those stations with an
unacceptable picture from the list. (
NOTES:
Fine tuning is performed automatically during Auto Channel Set. If
you want to perform tuning manually, refer to "Fine-Tuning Channels
Already Stored" ( pg. 72).
If you perform Auto Channel Set when the aerial cable is not
connected properly, "SCAN COMPLETED –NO SIGNAL–" appears
on the TV screen in step 8. In such a case, make sure of the aerial
connection and press ENTER; Auto Channel Set will start again.
If no sound accompanies the picture or the audio sounds unnatural
on some channels that have been stored by Auto Set Up, the TV
system setting for those channels may be incorrect. Select the
appropriate TV system for those channels. (
"INFORMATION")
pg. 72).
system of the unit. When programming
V system, be sure to check the
IEW
pg. 44, "ShowViewTM
pg. 72, "Delete A Channel")
pg. 72,
Manual Channel Set
Store channels that were not stored during Auto Set Up
( pg. 18), Preset Download (
( pg. 70).
1
Press SET UP to access the Main Menu screen.
2
Press w e to select "INITIAL SET UP", then press t.
3
Press w e to select "TUNER SET", then press t.
4
Press rt w e to select "MANUAL CH SET", then press
ENTER. The Manual Channel Set screen appears.
5
Press w e to select "EDIT", then press ENTER.
6
Press rt w e to select a
blank position in which you want to
store a channel, then press
ENTER. The Confirmation screen
appears.
7
Press rt to select "BAND",
then press ENTER.
8
Press rt to change the band
between CH (regular) and CC
(cable), then press ENTER.
9
Press rt to select "CH", then
press ENTER.
10
Press rt to input the
channel number you want to store.
To enter the registered station
name ( pg. 85), press rt to
select "ID", then press ENTER. Press rt.
For fine tuning adjustment, press rt to select "FINE", then press
ENTER. Press rt to perform fine-tuning.
When storing a channel that sends scrambled broadcasts, press rt
to select "DECODER", then press ENTER. Press rt to set
"DECODER" to "ON" ("OFF" is the default setting).
When "L-2 SELECT" is set to "VIDEO", "S-VIDEO", "SAT VIDEO" or
"SAT S-VIDEO", the "DECODER" setting cannot be changed.
( pg. 61)
11
Press ENTER to enter new channel information. The
Confirmation screen appears.
12
Press SET UP to close the Confirmation screen.
To change positions, see "Change Station Channel Position"
( pg. 72).
If you wish to set station names other than the ones registered in your
unit, see "Set Stations (B)" (
ATTENTION:
Guide Program numbers are not set when channels are stored
manually. ( pg. 70, "ShowViewTM System Setup")
SUBSIDIARY SETTINGS
pg. 19) or Auto Channel Set
(Example) To store in position 12.
INITIAL SET UP > MANUAL CH SET
PR CH ID CH CH
01 C01 ---- 07
02 02 CTEA 08
03 05 1000 09
04 C79 3SAT 10
9LIV 11
05 01
06 AB3 12
04
< >
MOVE EDIT
The programme currently
received on the selected channel
position appears behind the
confirmation screen.
INITIAL SET UP > MANUAL CH SET
BAND
CH
ID
FINE
DECODER
RETURN
ENTER
SET UP
SELECT WITH [ ] THEN PRESS [ENTER]
PRESS [SET UP] TO EXIT
EXIT SELECT
pg. 72).
71
EN
ID
----
----
----
----
----
----
RETURN
CH
2
----
OFF