JVC DR-DX5SEK Instructions Manual page 76

SUBSIDIARY SETTINGS
76
EN
Delete A Channel
1
Perform steps 1 – 5 of AManual Channel SetB (A pg. 75).
2
Press selection keys to select the channel you want to delete.
3
Press CANCEL(L) to delete a channel. The channel next to the
cancelled one moves up one line.
●
Repeat steps 2 – 3 as necessary.
4
Press SET UP or RETURN to close the Confirmation screen.
Change Station Channel Position
1
Perform steps 1 – 4 of AManual Channel SetB (A pg. 75).
2
Press selection keys to select AMOVEB, then press ENTER.
3
Press selection keys to select the channel you want to move,
then press ENTER.
4
Press selection keys to select the new channel position, then
press ENTER.
Example: If you moved the station in position 4 to position 2, the
stations originally in positions 2 and 3 each move down
one space.
INITIAL SET UP > MANUAL CH SET
PR CH ID PR
CH ID
01 26 BBC1 07 ----
23 ITV
02 08 ----
03 30 CH4 09 ----
04 33 BBC2 10 ----
05 37 CH5 11 ----
06 ----
12 ----
< >
MOVE EDIT RETURN
●
Repeat steps 3 – 4 as necessary.
5
Press SET UP or RETURN to close the Confirmation screen.
Set Stations (A)
Set station names that are registered in your unit.
1
Perform steps 1 – 5 of AManual Channel SetB (A pg. 75).
2
Press selection keys to select the channel you want to modify,
then press ENTER. The Confirmation screen appears.
3
Press selection keys to select AIDB, then press ENTER.
4
Move the arrow to the left ID selection column. Registered
station names (ID) (A pg. 88) appear as you press F G.
5
Press ENTER to select the desired ID, then press ENTER again
to select AOKB.
6
Press RETURN to return to the Manual Channel Set screen.
●
Repeat steps 2 – 5 as necessary.
7
Press SET UP or RETURN to close the Confirmation screen.
INITIAL SET UP > MANUAL CH SET
CH
PR ID PR CH ID
01 26 BBC1 07 ----
02 33 BBC2 08 ----
03 23 ITV 09 ----
04 05 CH4 10 ----
30
05 37 CH5 11 ----
06 ---- 12 ----
< >
EDIT RETURN
MOVE
Set Stations (B)
Set station names other than the ones registered in your unit.
1
Perform steps 1 – 5 of AManual Channel SetB (A pg. 75).
2
Press selection keys to select the channel you want to modify,
then press ENTER. The Confirmation screen appears.
3
Press selection keys to select AIDB, then press ENTER.
4
Press selection keys to select the desired characters (A–Z, 0–
9, –, Z, +, & (space)), then press ENTER.
●
Enter the remaining characters the same way (maximum of 4).
5
After entering all characters, press selection keys to select
AOKB, then press ENTER.
6
Press RETURN to return to the Manual Channel Set screen.
●
Repeat steps 2 – 5 as necessary.
7
Press SET UP or RETURN to close the Confirmation screen.
NOTE:
The characters available for the station name (ID) are A–Z, 0–9, –,
Z, +, & (space) (maximum of 4).
Fine-Tuning Channels Already Stored
1
Perform steps 1 – 5 of AManual Channel SetB (A pg. 75).
2
Press selection keys to select the channel you want to fine-
tune, then press ENTER. The Confirmation screen appears.
3
Press selection keys to select AFINEB, then press ENTER.
4
Press F G until the picture appears in its best quality, then
press ENTER.
●
Repeat steps 2 – 4 as necessary.
5
Press RETURN to return to the Manual Channel Set screen.
6
Press SET UP or RETURN to close the Confirmation screen.