HTC Amadeus Service Manual page 60

Chapter 13- Board Level Repair
If you are authorized by HTC to perform board level repair , you could ask below material/parts from
HTC .
13.1 Problem Identification & Troubleshooting
(1) Basic Repair Instructions for Component Replacement¡ G
Step 1. Place the solder-proof tape to cover the surrounding area of the components which being
replaced.
Warning ¡ G DO NOT overheat the tape and components to avoid the tape melted and make the component
damage.
Step 2. Use Heater Gun (HAKO850B, set the temperature between 350¢ J , Air Speed 3~5) to remove
the components.
Step 3. It has to wait the temperature cool down before the damaged components been removed. Or,
the others components could be gone when the solder-proof tape been taken off.
Step 4. After the damaged component has been replaced, clear the surroundings for solder and flux
residues.
HTC confidential
© 2004, HTC Corporation. All rights reserved. TOTAL 63 CONT.ON. 61 PAGE NO. 60