Dubbing (From Dvd To Vcr) - JVC HR-XVC24S Instruction Manual

54
EN
Dubbing
(from DVD to VCR)
Turn on the TV and select the VCR channel (or AV
mode).
Slide the TV/VCR/DVD switch on the Remote to the
right.
Slide to the
right.
VCR
SP/EP
3 PLAY
1 REW
¶ REC
4 SKIP
SKIP ¢
You can dub selected scenes from the DVD disc to a cassette,
starting and stopping wherever you wish.
However, it is not possible to dub the copy-protected disc.
In such case, "Err" appears on the front display panel.
A
For the VCR deck
Insert a cassette with the record safety tab intact.
For the DVD deck
For details, refer to "Placing a Disc" (
B
A Press VCR.
B Press SP/EP to select recording speed.
C Search for the point where you want to start dubbing
DVD
by pressing 4 PLAY, FF 5 or 3 REW then press
8 STOP.
C
A Press DVD.
B Search for the point where you want to start dubbing
by pressing 4 PLAY, FF 5, 3 REW, SKIP 6 or
2 SKIP.
C Press 9 PAUSE to pause playback a little before the
start point.
Turn off the on-screen bar if it appears on the TV screen.
D
Press and hold 7 REC, then press 4 PLAY on the Remote
FF ¡
(on DVD deck mode).
8 PAUSE "dub" lights on the front display panel.
7 STOP
E
Press 8 STOP.
Be sure to press 8 STOP while the VCR indicator lights up on
the unit.
NOTES:
You can dub from DVD to VCR regardless of the scan mode
setting. (
converted to the interlace signals when dubbing.
Set "ON SCREEN GUIDE" to "OFF" (
want to record the on-screen display for DVD discs during
dubbing.
There may be a discrepancy of several seconds between where
you intend editing to start, and where it actually starts.
The superimposed indication during the operation or dubbing
is not recorded.
Set "PICTURE CONTROL" to "EDIT." (
EDITING (VCR DECK) (cont.)
Load a cassette and place a disc.
Prepare the VCR deck for dubbing.
Prepare the DVD deck for dubbing.
Start dubbing.
End dubbing.
pg. 15) However, the progressive signals will be
pg. 8).
pg. 64) if you do not
pg. 59)