HARTFORD CG-125 Service Manual page 41

Hartford Industrial Co., Ltd.
NO CG
5.Generator/Start motor
5-2
Page
5.2 Start motor
5.2.1Removing start motor
Remove the starter motor cable from
the terminal
Bolt flange
Remove the starter motor retaining
screws. Remove the starter motor
5.2.2 Removing the starter
drive gears
Remove the starter motor drive gear shaft
Remove the starter reduction gear and shaft
Reassemble is the reverse of disassembly
5.2.3Installing the starter motor
Reassemble is the reverse of disassembly
Replace the starter motor and tighten the
retaining bolts to 0.8~1.2kg-m