Table of Contents
Advertisement
Charging Battery
Battery must be inserted in handset to
charge it.
Charging Battery Outside Japan
. SoftBank Mobile is not liable for problems
resulting from charging battery abroad.
Desktop Holder
Use specified AC Charger ZTDAA1 (sold
separately) together with Desktop Holder.
. In this guide, ZTDAA1 is referred to as "AC
Charger."
. AC Charger and Desktop Holder are not
waterproofed or dustproofed. Do not
charge battery while handset is wet.
. Handset and AC Charger may warm while
charging.
Important AC Charger Usage Note
. Fold back blades after charging. Do not
pull, bend or twist the cord.
Important Desktop Holder Usage Notes
. Battery will charge regardless of Display
position. However, do not attempt to
open handset.
. Do not subject to force/pressure.
1
2
34
AC 100V Outlet
AC Charger
Illumination Light
Release
2
Tabs
5
Blades
1
6
Charger
Connector
Charging
(Back)
Terminals
Arrows
Connector Port
1
Insert Charger Connector
into Desktop Holder
. With arrows up, insert connector until
it clicks.
Charging Battery
2
Extend blades and plug AC
Charger into AC outlet
3
Place handset onto Desktop
Holder
. Fit tabs into slots as shown in 1 and
push handset as indicated in 2 until
it clicks into place (resting flat).
. Illumination Light glows red while
charging.
. Illumination Light goes out when
battery is full.
4
Disconnect handset from
Desktop Holder
5
Unplug AC Charger
6
Disconnect Charger
Connector from Desktop
Holder
. Squeeze Charger Connector release
tabs and pull straight out to remove.
When Illumination Light Flashes
. Battery is unchargeable; may be defective
or simply at the end of its life; replace it.
5
1-
Advertisement
Table of Contents
