Battery & Usim Card - SoftBank 002SH User Manual

Hide thumbs Also See for 002SH:
Table of Contents

Advertisement

Battery & USIM Card Installation
. Do not apply excessive force to insert/remove USIM Card.
. USIM Card must be inserted to use this handset.
Inserting
1
Remove Battery Cover
Push here
Battery Cover
Notch
. Use Notch to open Cover. Push Cover
up as shown, then lift to remove it.
2
Remove Tray
Tray
. Use Tab to pull Tray straight out.
3
Place USIM Card on Tray
with IC chip down
USIM Card
4
Insert Tray
. Position and push in Tray fully.
5
Insert battery
. With logo side up, align battery
terminals with contact pins.
6
Close Battery Cover
Tab
. Fit cover top into slot, then press
down firmly.
USIM Tray
. Take care not to lose or damage removed Tray.
. Always insert USIM Card with Tray to
prevent card damage upon removal.
Power off first.
1
2
3
4
Press firmly
along edges
After Repairs, USIM Card Replacement
or Handset Upgrade/Replacement
. Some downloaded files may be
Battery & USIM Card
Removing
Remove Battery Cover
Remove battery
. Lift battery as shown.
. Do not short-circuit removed battery.
Remove Tray
Remove USIM Card from
Tray
. Replace Tray, reinstall battery and
close Battery Cover.
. Take care not to lose removed USIM
Card.
inaccessible. In addition, S! Applications
®
and BookSurfing
may be disabled after
USIM Card replacement.
3
1-

Advertisement

Table of Contents
loading

Table of Contents