Your Skybell; Water And Wet Locations; Repairing Or Modifying A Skybell - SkyBell WiFi Video Doorbell Installation & Starting Manual

Your SkyBell. The SkyBell Wi-Fi video
doorbell was built to withstand the wear
and tear of a traditional doorbell. Do not
disassemble, open, crush, bend, deform,
puncture, shred, microwave, incinerate, paint
or insert foreign objects into the SkyBell. Do
not use or attempt to install your SkyBell if it
has been damaged.
Water and Wet Locations. Your SkyBell Wi-
Fi video doorbell is weather resistant but not
waterproof. Take care not to spill any food
or liquid on the SkyBell especially before it's
installed. Try to install your SkyBell in a dry
location, protected from adverse weather
conditions.
DO NOT ATTEMPT TO INSTALL YOUR
SKYBELL IF YOU OR THE DWELLING ONTO
WHICH YOU ARE ATTEMTPING TO INSTALL
THE SKYBELL, ARE WET. USE THE CIRCUIT
BREAKER, TURN OFF THE POWER TO THE
DWELLING PRIOR TO INSTALLING THE
SKYBELL WI-FI VIDEO DOORBELL.
Repairing or Modifying a SkyBell. Never
attempt to repair or modify your SkyBell.
Doing so will automatically void your warranty.
Child Hazards. Keep the SkyBell Wi-Fi video
doorbell and its accessories out of the reach
of small children.
Keeping SkyBell Within Acceptable
Temperatures. SkyBell is designed to be
operated in temperatures between -40
degrees and 71 degrees C (-40 degrees to
160 degrees F). Low-or high-temperature
conditions might cause the Device to stop
working properly.
15