SkyBell WiFi Video Doorbell Installation & Starting Manual page 13

b. A blinking green light means
SkyBell device is connecting to
server and syncing your account.
c. The LED light will turn solid green
when it is ready for use. (On
average this takes a few minutes
but can take up to 15 minutes)
B. If the setup is unsuccessful, please:
a. Restart the Syncing Process by
first confirming that the SkyBell
light is blinking red. If it is not,
then press and hold the main
SkyBell button for 20 seconds
until the light is blinking red.
b. In the app, go back to the home
screen in the app and tap "Add
Device..."
c. Enter the Wi-Fi information and
the SkyBell Device ID again.
d. *Be sure you accurately enter
your Wi-Fi Password and
the SkyBell Device ID. Wi-Fi
passwords can be case sensitive.
3. Once your setup is successful, it may
take up to 15 minutes for the device
to connect to the server and for your
account to be created.
4. When the SkyBell LED is a solid green
light, press the SkyBell device button
12