Setup; Basic Info - Samsung SMARTCAM User Manual

❖ Network Speed
Profile Name Resolution
Low Speed Network VGA
Mid Speed Network HD(720P)
High Speed Network Full HD(1080P)
`
n
What is relay mode?
If the network condition is unstable, the camera cannot make a normal connection
(P2P), so it will set up a connection in relay mode. In this case, you will see the video
for the first seven minutes only.
`
Relay mode is added feature where the video from the camera is transmitted to
Samsung server then retransmitted to the user's computer.
`
If you have trouble connection to the camera, visit "http://www.samsungsmartcam.
com", go to support page, and refer to "Troubleshooting" on it.
`
It is recommended to use one browser at one time.
`
The Night Vision video produces a different visibility according to the distance between
camera and subject.
❖ Motion detection area setting
1)
Click the < > icon.
2)
Drag it to the screen to set the detection area.
3)
Click on <OK>.
If you want to delete the set area, click on <Delete All>.
`
n
The <Motion Detection> function needs to be activated in order to use the motion
zone function.
Recommended
Frame rate
bandwidth
20 fps 0.7Mbps
15 fps 1Mbps
30 fps 2.8Mbps

Setup

Basic Info

03
21