Manual Dubbing (From Vcr To Dvd) - JVC SR-MV50U Instructions Manual

Manual Dubbing (From VCR To DVD)

Dubbing A Part Of A Cassette
You can dub the selected scenes on a tape to the DVD disc,
starting and stopping wherever you wish.
Turn on the unit.
Turn on the TV and select the video channel (or AV mode).
Slide the TV/CABLE/DBS/DVD switch to DVD.
VCR/DVD
3
8
REC MODE
NOTES:
If you set the dubbing direction incorrectly, you could erase an
important recording that you wanted to dub. It is recommended to
conduct a test with unimportant cassettes first.
There may be a discrepancy of several seconds between where you
intend dubbing to start, and where it actually starts.
The superimposed indication during the operation or dubbing is not
recorded.
It is not possible to dub a tape with a copy protection signal.
If the recording capacity of disc become full, the tape stops
automatically.
It is not possible to perform other operations like Live Memory
Playback. Check the recorded program on the disc after dubbing.
Dubbing is not possible on the discs used exclusively for On-Disc
Timer Programming.
When dubbing can not be performed properly, set "BLUE BACK" to
"OFF". ( pg. 72)
REC
VCR ]
VCR/DVD MODE
DVD
DUBB. Lamp
59
8 3
U
1 2 3
4 5 6
7 8 9
0
4
5
9
7
1
Press VCR/DVD repeatedly so that the VCR lamp lights up on
the unit.
2
Press SET UP to access the Main Menu screen.
3
Press rt to select "COPY SET",
then press ENTER.
4
Press rt to select "COPY MODE",
then press ENTER to select "FULL
DUBB.
COPY" or "1 PROG.".
Pressing ENTER toggles the setting
between "FULL COPY" and "1 PROG.".
5
Press SET UP to complete the
setting.
When "1 PROG." is selected, recording
will stop when an index code or unrecorded portion is detected.
6
For VCR deck
7
Load a cassette you want to dub.
For DVD deck
Load a recordable disc.
7
Press VCR]DVD to select the dubbing direction.
8
Locate the point from where you want to start dubbing, then
pause playback by pressing the following buttons: 4, 5, 3,
8, 9
9
Prepare the DVD deck for dubbing.
A Press VCR/DVD repeatedly so that the DVD lamp lights up on
the unit.
B Press REC MODE repeatedly to set the recording mode.
C Press 7 and 9 simultaneously so that the DVD deck enters the
Record Pause mode.
10
Press and hold DUBB. for more than 2 seconds to start
dubbing. The dubbing (DUBB.) lamp lights up on the unit.
11
Press 8 to stop recording on the DVD deck. Then press VCR/
DVD, and press 8 to stop playback on the VCR deck.
EDITING
59
EN
MAIN MENU
COPY SET
FUNCTION SET
PRESS ( , ) THEN (OK)
(SET UP) TO END
COPY
COPY MODE FULL COPY
FULL DISC OFF
AUTO FINALIZE OFF
( , ) THEN (ENTER)
(SET UP) TO END