Anti-Crease; Cottons Normal; Woollens Handcare - Miele T 8812 C Operating Instructions Manual

Programmable functions

Anti-crease

If laundry is not removed as soon as
the programme has finished, the
drum will continue to rotate at
intervals for two hours to prevent
creasing.
The anti-crease function
– is activated when the tumble dryer is
delivered. You can shorten the
duration of the anti-crease phase or
deactivate it if wished.
– is used in all programmes except

Woollens handcare.

– should be left activated.
Follow the steps (A,B,C ...) using
the Start button and programme
selector to programme and store in
memory.
Before you begin, ensure that:
– The tumble dryer is switched off.
– The door is closed.
– The programme selector is at Finish.
A Press the Start button and keep it
pressed in whilst carrying out steps
B-C.
B Switch the dryer on.
C Wait until the Start indicator light
lights up constantly . . .
D . . . and then release the Start button.
46
E Turn the programme selector to

Cottons Normal.

The Cooling down light will flash three
times.
The flashing sequence of the
Drying light shows which option is
currently selected.
– If the Drying light is not flashing:
Anti-crease is deactivated
– If the Drying light flashes once:
Anti-crease will last for 1 hour
– If the Drying light flashes twice:
Anti-crease will last for 2 hours
(factory default setting).
F Pressing the Start button switches
between the 3 options.
G Switch the dryer off.
The setting you have selected is now
stored in memory. You can change it
again at any time.
To check the setting:
^ Carry out steps A to E.
^ Switch the dryer off after checking
the setting as described above.