Troubleshooting - Vita-Mix Blending Station MP Owner's Manual

T roubleshooting
1. Problem:
• Loud noise from blender container
blade area
• Container blades do not spin
• Increased vibration
• Leaking from bottom of container
2. Problem:
• Loud grinding noise from the blender
motor
3. Problem:
• Machine will not run
• Display window does not say "READY"
4. Problem:
• Machine starts then shuts off
5. Problem:
• Display window reads
SHUTDOWN
SEE MANUAL
6. Problem:
• Display window reads
MOTOR LOCKED PROGRAM
TERMINATED
24
Solution #1:
Broken or worn drive socket. Replace (Item
#891). Instructions are included with part.
Solution #2:
Check blade assembly for loose, damaged
or nicked components and replace.
Solution #3:
Tighten retainer nut with the retainer nut
wrench moving clockwise until it is snug.
(See page 17.)
Solution #1:
Due to some damaged motor bearings, your
machine may need to be repaired. Call
Vita-Mix Technical Support.
Solution #1:
Double-check to make sure power cord is
firmly in power outlet.
Solution #2:
Check to make sure the ON/OFF power
switch is in the ON position.
Solution #3:
Turn the ON/OFF power switch to OFF, then
ON, to reboot the electronics.
Solution #1:
Check to make sure there is power to the
machine.
Solution #2:
Call Vita-Mix Technical Support.
Solution #1:
Let the machine cool down for an hour, then
restart.
Solution #2:
Call Vita-Mix Technical Support.
Solution #1:
Let the machine cool down for an hour, then
restart.
Solution #2:
Call Vita-Mix Technical Support if the machine
does not work after sitting at room tempera-
ture for 24 hours.