Playback; General Playback Features - JVC DR-MH220SE Instructions Manual

Playback

General Playback Features

1. Load your chosen disc in the tray, with the playback side down.
2. Starts playback using HOME menu (see page 15).
3. To stop the playback, press STOP (x).
The unit records the stopped point, depending on the disc. "Xx" appears on the screen briefly.
Press PLAY (N) to resume playback (from the scene point). If you press STOP (x) again or unload the disc
("x" appears on the screen.), the unit will clear the stopped point.
Note:
The resume point may be cleared when a button is pressed (for example; TIMER REC, HOME, MENU/LIST,
etc).
4. Press OPEN/CLOSE (Z) to remove the disc.
Press OPEN/CLOSE (Z) to close disc tray or press STANDBY/ON, the disc tray closes automatically and
unit turns off.
Note:
When using a DVD+R/RW, the recorder will execute the Menu-making operation to update the new title and
editing when removing the disc from the recorder or turn off the recorder. So you must remove the disc after
selecting the recorder's operation mode to DVD mode.
Buttons Operations
OPEN / CLOSE (Z) Opens or closes the disc tray.
PAUSE (X) During playback, press PAUSE (X) to pause playback.
Press PAUSE (X) repeatedly to play Frame-by-Frame.
Tip:
You can advance or back up the picture frame-by-frame by
pressing b / B repeatedly during PAUSE mode.
The picture frame-by-frame in reverse is not available for
Video CD.
. / > During playback, press . or > to go to the next
chapter/track or to return to the beginning of the current
chapter/track.
Press . twice briefly to step back to the previous
chapter/track.
Tips:
m / M During playback, press m or M repeatedly to select the
required scan speed.
HDD, DVD; 5 steps
DivX; 4 steps
Video CD, Audio CD; 3 steps
While the playback is paused, press m or M
repeatedly to play in slow motion.
HDD, DVD; 4 steps
Video CD; 3 steps (Forward only)
To go directly to any chapter during DVD playback, press
DISPLAY twice and press v / V to select the chapter
icon. Then, input the chapter number or use b / B.
On an Audio CD, to go directly to any track, enter the
track number using the numbered buttons (0-9) during
playback.
Discs
All Discs
All Discs
HDD DVD ALL VCD
HDD DVD ALL VCD
DivX ACD MP3
WMA
HDD DVD ALL VCD
DivX ACD
HDD DVD ALL VCD
23