Garmin StreetPilot c320 Setup Manual page 3

Install Software and Map Data
1
Remove the CDs from the box
titled "Map Software." Insert
Disk 1 into your computer.
Note: If the start-up file does not
run automatically, click the Windows
Start button and select Run.... Type
your CD-ROM's drive followed by
"Setup" (for example, "E:\Setup").
Click OK.
2
Follow the series of instructions
that appear on your computer.
When prompted, connect your
c320 to your computer using the
enclosed USB cable.
Where is my USB cable connection?
On your c320, note the location of the USB cable port as shown on the previous
panel of this Setup Guide. On your computer, look for the USB symbol
located on the back of your computer. Do not connect the USB cable to your unit
until you are instructed to do so.