Garmin StreetPilot C320 Setup Manual

Garmin gps receiver - car navigation system user manual

Hide thumbs Also See for StreetPilot C320:

Download this manual See also: Administrator's Manual, Setup Manual

StreetPilot

190-00435-02 Rev. C

setup

guide

This setup guide includes instructions to

conﬁgure your c320 and load maps.

To ensure a successful installation, follow

the steps outlined in this guide.

connect the USB cable to your PC until you

are instructed to do so.

For information about using your c320, refer

to the c320 Quick Reference Guide located in

the box. Also see the c320 Owner's Manual

at www.garmin.com/products/sp320/.

c320

Do not

Page 1 USB cable to your PC until you are instructed to do so. For information about using your c320, refer to the c320 Quick Reference Guide located in the box. Also see the c320 Owner’s Manual at www.garmin.com/products/sp320/. c320 Do not...
Page 2 Open this setup guide and follow the instructions to set up your c320. Complete all of the setup steps: Step 1: Conﬁgure your c320 Step 2: Install software and map data Step 3: Load maps Do not connect the USB cable to your PC until you are instructed to do so. Step 1: Conﬁgure Your c320 Press and hold the Power button to turn...
Page 3: Map Data
Remove the DVD-ROM from the case and insert it into your computer’s DVD-ROM drive. If the startup ﬁle does not run automatically, click the Windows Start button and select Run…. Type your DVD-ROM’s drive followed by “Setup” (for example, “E:\Setup”). Click OK. Follow the series of instructions that appear on your computer.
Page 4 To load maps on your c320, follow the instructions on the Map Install Wizard shown on your computer screen. Click the regions on the map that you want to load into your c320. Click Next. After your maps are loaded, click OK.