Before You Begin - Garmin StreetPilot c320 Setup Manual

Follow the setup instructions
that begin below. You cannot
begin using your unit until you
complete all of the Setup Steps.
Configure Your c320
1
Press and hold the
Power button to turn
on the unit.
Note: A "Low Battery"
warning may appear when
you turn on the unit. In this
case, charge the unit for three
hours by connecting it to the
enclosed AC power adapter.
2
Answer the configuration
questions that appear.
When you see the screen
that states "To use this
unit, map data must be
installed," you are ready
to install software and
map data.

Before you begin . . .

Setup Steps:
• Configure your c320
• Install software and map data
• Load maps
volume control
USB cable port
power button