Samsung SCX-340x series Service Manual page 105

► Error Code
S3–3121
► Error message
Scanner Locked.
► Symptom
CIS unit in the scanner does not move.
► Troubleshooting method
1) Check if the CIS unit moves when turning the machine off then on.
2) Check if the CIS cable is connected correctly. Reconnect it.
3) If the CIS unit is defective, replace it.
4) Check if there is any defective part in the scanner. Find and replace it.
5) If the problem persists, replace the main board.
Copyright© 1995-2011 SAMSUNG. All rights reserved.
4. Alignment and Troubleshooting
4-39