Using The Memory Function; Averaging Function; To Display The Measurement Values - Omron BP742CAN Instruction Manual

USING THE MEMORY FUNCTION

The monitor is designed to store the blood pressure and the pulse rate in the memory
for two people (USER A and USER B) every time a measurement is completed. The
monitor automatically stores up to 30 sets of measurement values (blood pressure and
pulse rate) for each user (A and B). When 30 sets of measurement values are stored, the
oldest record is deleted to save the most recent values.

AVERAGING FUNCTION

The monitor calculates the average reading based on the three most recent sets of
measurement values taken within 10 minutes of the most recent reading.
NOTE: If two sets of measurement values are stored in the memory for the 10 minutes
period, the average is based on the two sets of measurement values. If one set
of measurement values is stored, this is displayed as the average.

TO DISPLAY THE MEASUREMENT VALUES

1. Press the START/STOP button to turn the monitor on.
2. Select your USER ID (A or B).
3. Press the Up or Down button (
appears on the display when the average reading is shown.
4. Press the Up or Down button (
values.
Press the Down button (
Average value → most recent set of measurement values → the older readings →
back to the average value
Press the Up button (
Average value → oldest set of measurement values → the more recent readings →
back to the average value
/ ). The Average Value Symbol (
/ ) to display the sets of measurement
) repeatedly
) repeatedly
19
)