Error Indicators - Omron BP742CAN Instruction Manual

SYMBOL

ERROR INDICATORS

CAUSE
Monitor could not
detect pulse wave.
Cuff under-infl ated.
Cuff not applied
correctly.
Cuff over-infl ated.
Device error.
Movement during
measurement.
Irregular or weak
pulses are detected.
Batteries are
exhausted.
Take another measurement and
remain still until the measurement is
complete.
Remove the arm cuff.
Read "Taking a Measurement".
Wait 2-3 minutes.
Take another measurement.
Contact Customer Service.
Keep still and take another
measurement.
Remove the arm cuff. Wait 2-3
minutes and then take another
measurement. Repeat the steps in
section "Applying the Arm Cuff".
If this error continues to appear,
contact your doctor.
Replace the four batteries.
Refer to "Battery Installation".
22
CORRECTION