Power Sunroof - Chevrolet Captiva Manual

Power sunroof

The power sunroof is an optional item.
Next to the fully open and closed function it incor-
porates a tilt function. A retractable sunshade pro-
tects the occupants from unwanted sun radiation
when the glass roof is closed.
The Sunroof Control Module has been designed to
memorise closing and opening steps. A loss of the
memorised positioning data can occur when the
operating current increases above the maximum
operating current of 3.5 - 4.0 Ampere. This is the
case when for example foreign material is on the
sunroof guide rail or an object blocks the sunroof
closing during operation.
Body Body
© 2008 General Motors Corporation. All rights reserved.
Once the roof has been checked and released from
blocking objects or foreign material the sunroof
can be re-calibrated by following the next proce-
dure:
1. Press the switch in the rearward direction until
the sunroof tilts open. Release the switch when
the sunroof has fully opened. If the sunroof
opens slightly and stops, release and then press
the switch and hold it. Repeat these steps until
the sunroof opens fully.
2. Press the switch in a forward direction until the
sunroof closes fully.
3. Press the switch in a rearward direction until the
sunroof opens for 15 seconds.
4. Confirm the re-calibration procedure by
performing the sunroof opening and closing
operation.
1. Sunroof control module
2. Sunroof motor
TRAINING
15