2. Prepare all mating surfaces as necessary.
3. Apply 3M Weld-Thru Coating P/N 05916 or
equivalent to all mating surfaces.
4. Position the front upper outer rail to the vehicle
using 3-dimensional measuring equipment.
Clamp the front upper outer rail into place.
5. Plug weld accordingly.
6. Clean and prepare all welded surfaces.
7. Apply the sealers and anti-corrosion materials to
the repair area, as necessary.
8. Paint the repair area.
9. Install all related panels and components.
10. Connect the negative battery cable.
11. Enable the SIR system.
Body
© 2008 General Motors Corporation. All rights reserved.
TRAINING
21