Table Of Contents - Durabrand DCF2003 Service Manual

Proper service and repair is important to the safe, reliable operation of all
Funai Equipment. The service procedures recommended by Funai and de-
scribed in this service manual are effective methods of performing service
operations. Some of these service special tools should be used when and
as recommended.
It is important to note that this service manual contains various CAUTIONS
and NOTICES which should be carefully read in order to minimize the risk of
personal injury to service personnel. The possibility exists that improper
service methods may damage the equipment. It also is important to under-
stand that these CAUTIONS and NOTICES ARE NOT EXHAUSTIVE. Funai
could not possibly know, evaluate and advice the service trade of all con-
ceivable ways in which service might be done or of the possible hazardous
consequences of each way. Consequently, Funai has not undertaken any
such broad evaluation. Accordingly, a servicer who uses a service proce-
dure or tool which is not recommended by Funai must first use all precau-
tions thoroughly so that neither his safety nor the safe operation of the
equipment will be jeopardized by the service method selected.
Specifications ........................................................ 1-1
Important Safety Precautions................................ 2-1
Standard Notes for Servicing ................................ 3-1
Disassembly Instructions ...................................... 4-1
Electrical Adjustment Instructions ......................... 5-1
Block Diagram....................................................... 6-1
Schematic Diagram / CBA's and Test Points ....... 7-1
Schematic Diagram .............................................. 7-3
IMPORTANT SAFETY NOTICE

TABLE OF CONTENTS

CBA Views and Test Points.................................. 7-11
Wave Forms .......................................................... 8-1
Wiring Diagram...................................................... 9-1
IC Pin Function .................................................... 10-1
Cabinet Exploded View ....................................... 11-1
Packing Exploded View ....................................... 11-5
Mechanical Parts List .......................................... 12-1
Electrical Parts List .............................................. 13-1