Getting Started; Insert Your Sim Card; Insert The Battery And; Charge The Battery - O2 Exec User Manual

Getting started

Insert your SIM card

Please be careful not to force
any of the SIM reader
Remove the rear cover by
components, as this may cause
gently sliding the square button
damage. It doesn't take much
in the direction of the arrow
pressure to insert the
then lift the cover off.
SIM correctly.
Lift up the flap of the SIM
holder and insert the SIM so
that the gold contacts are face
down. (You'll need to match
the SIM's angled corner to the
angled corner of the holder.)
Then push the SIM holder lock
into place.
Insert the battery
and replace the cover
Carefully connect the battery
so the gold contacts connect
with the row of connectors on
4
the top left hand side of the

Charge the battery

Xda Exec (just below the
You need to charge the battery
camera lens). You can only fit
fully before using your Xda Exec
the battery one way and you
for the first time.
shouldn't need to use force.
Connect the AC charger to your
Gently press the battery
Xda Exec and plug it into the
down to secure it in place.
wall. We recommend you use
the AC adaptor the first time
Slide the red catch into the
you charge your Xda, and not
Lock position.
the PC synchronisation cable.
Slide the battery cover towards
A solid amber
the camera lens then gently
Xda Exec is being charged. This
snap into place.
light will turn
battery is fully charged. We
recommend you charge the
battery for at least eight hours
before using your Xda Exec for

the first time.

Turn on and set up for the
first time
Turn on your Xda Exec by
pressing the power button
on the left-hand edge.
A welcome screen will appear.
It will prompt you to tap the
light shows your
screen to set up your Pocket PC.
You can do this by following
green when the
the on-screen instructions.
5