Check-In / Check-Out - NEC SL1000 User Manual

Check-In / Check-Out

Check-In / Check-Out operation is available at Reception terminal.
In the STATUS mode, the DSS Console key for the room becomes "ON : Check-In" / "OFF :
Check-Out".
 To Check-In
Speaker
7
 When hotel room telephone is checked in, their toll restriction class can be changed automatically by the
system to allow the guest to make calls.
 To Check-Out
Speaker
7
 When hotel room telephone is checked out, the system will automatically cancel any Message Waiting, Do
Not Disturb, Room to Room Call Restriction, Toll Restriction and Wake Up Calls that may be set at the room
telephone.
 Room Clean Status (Option)
It is optional setting that the Room Clean Status (Maid Required, Maid in Room, etc) for Guest
Room can be added, if necessary. The status shall be changed by dialing the Service Code
from Reception terminal and/or Guest Room Telephone.
Speaker
7
The Room Clean Status can be changed from Guest Room Telephone as well by following
operation.
7
Room Number
3 8 ?
Room Number
3 9 ?
Room Number
4 1 ?
Status (1-4)
4 0 ?
1 : Room Clean
2 : Maid Required
3 : Maid in Room
4 : Inspection Required
? ?
Confirmation
? ?
Confirmation
Status (1-4)
? ? ?
1 : Room Clean
2 : Maid Required
3 : Maid in Room
4 : Inspection Required
Confirmation
Tone
3
Speaker
Tone
Speaker
Tone
Speaker
Confirmation
Tone