Panasonic WV-CF504 Installation Manual page 14

q Video output cable
w Power cord
e Dome cover
r Panning table
Rotate this table to adjust the panning
angle of the camera.
t Monitor output connector
Connects the monitor for adjustment to
this output connector.
y Tilting lock screws (left and right)
Fixes the tilting position.
u Tilt adjusting table
Adjusts the azimuth angle of the image.
i Camera fixing screw
Fixes the attachment on the camera body.
o Panning lock screw [LOCK]
Fixes the panning table.
!0 Zoom lock knob
Locks the zoom point.
!1 Focus lock knob
Locks the focal point.
!2 ABF operation indicator
Indicates the status of ABF operation.
!3 Setting button [(SET), ABF2/MENU]
Confirms the setting contents.
!4 Down button [(DOWN), ABF1]
Moves the cursor downward and selects
items in the setup menu.
!5 Up button [(UP)]
Moves the cursor upward and selects
items in the setup menu.
!6 Left button [(LEFT), NEAR]
Moves the cursor to the left, selects the
mode and adjusts some levels.
14
!7 Right button [(RIGHT), FAR]
Moves the cursor to the right, selects the
mode and adjusts some levels.
!8 Inner dome