Canon Pixma MP610 Quick Start Manual page 7

4
Load printing paper.
In the following process, you will be required to perform the Print Head Alignment, and you
will need two sheets of supplied paper (MP-101) loaded with the printing side (whiter side)
facing up in the Rear Tray.
Important
Do not place any objects in front of the machine.
When loading paper in the Rear Tray, make sure that the Rear Tray lamp is lit.
Always load paper in portrait orientation. Loading paper in landscape orientation can cause the
paper to be jammed.
Notes on the Print Head Alignment
Print Head Alignment will take about 13 minutes to complete. Do not open the Scanning Unit
(Printer Cover) while printing.
If the pattern is not printed successfully and some error messages appear on the LCD, press
the OK button to clear the error, go ahead to the next procedure to install the MP Drivers and
on-screen manuals, then refer to "An Error Message Is Displayed on the LCD" in the User's
Guide on-screen manual.
Selecting the Language for the LCD
1
Press the HOME button. Wait for about 5 seconds, select
OK button.
2
Press the ] button to select
3
Press the } button four times, then press the OK button.
If the Bluetooth unit is connected to the machine, press the } button five times, and then
press the OK button.
4
Press the { or } button to select the language for the LCD, then press the OK
button.
, then press the OK button.
Preparing the Machine
, and then press the
5